ethtool eth0
Exemple de sortie :
Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Half Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: no
ethtool -i eth0
Exemple de sortie :
driver: b43 version: 3.2.13-1-ARCH firmware-version: 666.2 bus-info: ssb0:0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no
ethtool -S eth0
ethtool -s eth0 speed 100 autoneg off
ethtool -s eth0 wol g
ethtool -p eth0 <seconde>